The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-992-5784, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-992-5784 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN |
| Head Height | 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN |
| Fastener Length | 0.250 INCHES MAXIMUM IN |
| Thread Length | 0.250 INCHES MAXIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B MINIMUM OVERALL |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Designator | AS MODIFIED BY CONDITION A |
| Departure From Cited Document | AS MODIFIED BY MATERIAL |
| Nondefinitive Spec/std Data | 6 TYPE |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Test Data Document | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS16995-2 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| Thread Quantity Per Inch | 56 |
| Material | STEEL COMP 304 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS16995-2 | 2/1 Government specification standardization U.S. Government activity |
NSN 5305-00-992-5784 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5306-01-675-6986. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-992-5784: Width Across Flats: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN; Head Height: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN; Fastener Length: 0.250 INCHES MAXIMUM IN; Thread Length: 0.250 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.