The Setscrew, cataloged under National Stock Number 5305-00-990-9996, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-990-9996 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.037 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN |
| Fastener Length | 0.188 INCHES NOMINAL IN |
| Spline Width | 0.017 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| Thread Length | 0.188 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Spline Major Diameter | 0.049 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Nondefinitive Spec/std Data | 4 TYPE AND 1 STYLE |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | FOUR SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 56 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN565AC2L3 | 2/2 Government specification standardization U.S. Government activity |
| AN565AC2L3 | 5/9 Secondary reference Smiths Aerospace (customer Services Division) |
| AN565AC2L3 | C/1 Advisory reference — outside the item-of-supply concept Ge Aviation Systems Ltd |
NSN 5305-00-990-9996 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-990-9996: Spline Minor Diameter: 0.037 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN; Fastener Length: 0.188 INCHES NOMINAL IN; Spline Width: 0.017 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN; Thread Length: 0.188 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.