The Screw,machine, cataloged under National Stock Number 5305-00-982-4698, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-982-4698 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN |
| Screw Surface Treatment | ANODIZE |
| Fastener Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Thread Length | 0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Screw Material | ALUMINUM ALLOY 2024 |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Hole Configuration Style | ROUND |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Head Diameter | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FFS92TYPE1STYLE5S | 4/1 Identification reference U.S. Government activity |
| MS35277-43 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-982-4698 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-982-4698: Head Height: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN; Screw Surface Treatment: ANODIZE; Fastener Length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Thread Length: 0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.