PartsTable TECHNICAL DATA SHEET
NSN 5305-00-973-1048Government record, cited

Screw, Shoulder5305-00-973-1048

NSN 5305-00-973-1048 · NIIN 009731048 · Part number A51M42524-11
Tens Machine Company, Inc. Dba Tens Machine Co Inc · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 8P689
Government record, cited
NSN 5305-00-973-1048 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-973-1048. Manufacturer of record part number: A51M42524-11.
Also searched as  5305-00-973-1048 · 5305009731048 · NIIN 009731048 · 00-973-1048 · FSC 5305 Screws · CAGE 8P689 · A51M42524-11
Nearby stock numbers  ·
Features
  • Screw,shoulder — FSC 5305
  • Head Height: 0.100 INCHES NOMINAL IN
  • Fastener Length: 1.923 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
  • Shoulder Length: 1.611 INCHES MINIMUM AND 1.631 INCHES MAXIMUM FIRST SHOULDER IN
  • Surface Treatment Document and Classification: MIL-C-8837 TY 2 CL 1 1 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Shoulder Diameter: 0.281 INCHES MINIMUM AND 0.282 INCHES MAXIMUM FIRST SHOULDER IN
  • Thread Length: 0.312 INCHES MAXIMUM IN
  • Shoulder Shape: ROUND FIRST SHOULDER
Identification
  • NSN: 5305-00-973-1048
  • NIIN: 009731048
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: A51M42524-11
  • Manufacturer: Tens Machine Company, Inc. Dba Tens Machine Co Inc
General Description

The Screw,shoulder, cataloged under National Stock Number 5305-00-973-1048, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Tens Machine Company, Inc. Dba Tens Machine Co Inc. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-973-1048
Primary Part NumberA51M42524-11
Item NameScrew,shoulder
FSC / FSG5305 / 53 — Screws
ManufacturerTens Machine Company, Inc. Dba Tens Machine Co Inc
StatusACTIVE
Head Height0.100 INCHES NOMINAL IN
Fastener Length1.923 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
Shoulder Length1.611 INCHES MINIMUM AND 1.631 INCHES MAXIMUM FIRST SHOULDER IN
Surface Treatment Document and ClassificationMIL-C-8837 TY 2 CL 1 1 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Shoulder Diameter0.281 INCHES MINIMUM AND 0.282 INCHES MAXIMUM FIRST SHOULDER IN
Thread Length0.312 INCHES MAXIMUM IN
Shoulder ShapeROUND FIRST SHOULDER
Hardness Rating46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.071 INCHES MINIMUM AND 0.076 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationG-1010 FSCM 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Surface TreatmentCADMIUM THREADS
Surface TreatmentCADMIUM AND CHROMIUM GRIP
Internal Drive StyleSLOT
Thread Class3A A
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch28
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.823 INCHES MINIMUM AND 1.843 INCHES MAXIMUM FIRST HOLE IN
Head Diameter0.500 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
A51M42524-11 Tens Machine Company, Inc. Dba Tens Machine Co Inc (USA)
A51M42524-11 Howe Machine & Tool Corp. Dba Howe Machine & Tool Corp (USA)
Reference documents
ReferenceMeaning
A51M42524-11 5/9 Secondary reference
Alco Machine Co Inc
A51M42524-11 5/9 Secondary reference
Northrop Grumman Systems Corporation
A51M42524-11 C/1 Advisory reference — outside the item-of-supply concept
Northrop Grumman Systems Corporation
A51M42524-11 3/9 Design control — primary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-973-1048?

NSN 5305-00-973-1048 is a Screw,shoulder, manufactured by Tens Machine Company, Inc. Dba Tens Machine Co Inc, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-973-1048?

NSN 5305-00-973-1048 has 2 manufacturer part numbers on file: A51M42524-11 (Tens Machine Company, Inc. Dba Tens Machine Co Inc), A51M42524-11 (Howe Machine & Tool Corp. Dba Howe Machine & Tool Corp).

What are the specifications of A51M42524-11?

Key specifications for A51M42524-11: Head Height: 0.100 INCHES NOMINAL IN; Fastener Length: 1.923 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN; Shoulder Length: 1.611 INCHES MINIMUM AND 1.631 INCHES MAXIMUM FIRST SHOULDER IN; Surface Treatment Document and Classification: MIL-C-8837 TY 2 CL 1 1 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-973-1048 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com