The Screw,machine, cataloged under National Stock Number 5305-00-964-0792, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-964-0792 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Thread Length | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 9C STYLE |
| Screw Material | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 64 |
| Thread Series Designator | UNF |
| Head Diameter | 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35207-1 | 5/9 Secondary reference U.S. Government activity |
| FFS92 | 4/1 Identification reference U.S. Government activity |
| MS35207-201 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-964-0792 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-964-0792: Head Height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Thread Length: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.