PartsTable TECHNICAL DATA SHEET
NSN 5305-00-958-5265Government record, cited

Screw, Machine5305-00-958-5265

NSN 5305-00-958-5265 · NIIN 009585265
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-958-5265 · 5305009585265 · NIIN 009585265 · 00-958-5265 · FSC 5305 Screws · 122-5277664 ITEM 56 · FFS92 · MS35190-340 · 122-5277665 ITEM 56 · HN152-1145 PART
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Head Height: 0.130 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
  • Screw Surface Treatment: CADMIUM AND CHROMATE
  • Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
  • Thread Length: 0.409 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
  • Nominal Thread Diameter: 0.500 INCHES IN
  • Head Style: FLAT COUNTERSUNK UNDERCUT
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-00-958-5265
  • NIIN: 009585265
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,machine, cataloged under National Stock Number 5305-00-958-5265, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-958-5265
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.130 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
Screw Surface TreatmentCADMIUM AND CHROMATE
Fastener Length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Thread Length0.409 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
Nominal Thread Diameter0.500 INCHES IN
Head StyleFLAT COUNTERSUNK UNDERCUT
Thread DirectionRIGHT-HAND
Nondefinitive Spec/std Data3 TYPE AND 2C STYLE
Screw MaterialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
Minimum Tensile Strength60000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
Thread Class2A A
Thread Quantity Per Inch13
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
122-5277664 ITEM 56 C/1 Advisory reference — outside the item-of-supply concept
Naval Sea Systems Command
FFS92 4/1 Identification reference
U.S. Government activity
MS35190-340 5/9 Secondary reference
U.S. Government activity
122-5277665 ITEM 56 C/1 Advisory reference — outside the item-of-supply concept
Naval Sea Systems Command
HN152-1145 PART C/1 Advisory reference — outside the item-of-supply concept
Naval Sea Systems Command
MS35190-340 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-958-5265?

NSN 5305-00-958-5265 is a Screw,machine, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-958-5265?

Key specifications for 5305-00-958-5265: Head Height: 0.130 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Thread Length: 0.409 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-958-5265 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com