PartsTable TECHNICAL DATA SHEET
NSN 5305-00-953-4547Government record, cited

Screw, Cap, Socket Head5305-00-953-4547

NSN 5305-00-953-4547 · NIIN 009534547
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-953-4547 · 5305009534547 · NIIN 009534547 · 00-953-4547 · FSC 5305 Screws · 7559748P4 · FF-S-86 · 20098-3F-34 · 090-06132-68S
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.156 INCHES NOMINAL IN
  • Head Height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
  • Fastener Length: 2.094 INCHES MINIMUM AND 2.156 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 1.063 INCHES MINIMUM IN
  • Hole Configuration Style: ROUND LONGITUDINAL HOLE
  • Material Document and Classification: 66,COMP 18-8 FED STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-00-953-4547
  • NIIN: 009534547
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-953-4547, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-953-4547
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Width Across Flats0.156 INCHES NOMINAL IN
Head Height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
Fastener Length2.094 INCHES MINIMUM AND 2.156 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length1.063 INCHES MINIMUM IN
Hole Configuration StyleROUND LONGITUDINAL HOLE
Material Document and Classification66,COMP 18-8 FED STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength80000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class2A A
Thread Quantity Per Inch32
MaterialSTEEL CORROSION RESISTING OVERALL
Hole Quantity4
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.035 INCHES NOMINAL IN
Head Diameter0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
7559748P4 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
FF-S-86 4/1 Identification reference
U.S. Government activity
20098-3F-34 C/1 Advisory reference — outside the item-of-supply concept
Sps Technologies, Llc Dba PB Fasteners
090-06132-68S 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-953-4547?

NSN 5305-00-953-4547 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-953-4547?

Key specifications for 5305-00-953-4547: Width Across Flats: 0.156 INCHES NOMINAL IN; Head Height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 2.094 INCHES MINIMUM AND 2.156 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-953-4547 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com