The Screw,machine, cataloged under National Stock Number 5305-00-950-2884, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-950-2884 |
| Primary Part Number | 32-84087-77 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.949 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN |
| Thread Length | 0.496 INCHES MINIMUM AND 0.571 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | IRON ALLOY 660 |
| Minimum Tensile Strength | 140000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.452 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 32-84087-77 PRIMARY | The Boeing Company Div Defense (USA) |
NSN 5305-00-950-2884 is a Screw,machine, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-950-2884 has 1 manufacturer part number on file: 32-84087-77 (The Boeing Company Div Defense).
Key specifications for 32-84087-77: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.949 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN; Thread Length: 0.496 INCHES MINIMUM AND 0.571 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.250 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.