The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-941-0150, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-941-0150 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN |
| Head Height | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN |
| Fastener Length | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Thread Length | 0.234 INCHES MINIMUM IN |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL |
| Hole Quantity | 2 |
| Thread Series Designator | UNJC |
| Hole Type | DRILLED |
| Hole Diameter | 0.036 INCHES NOMINAL IN |
| Head Diameter | 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 99-4213-01 | 3/2 Design control — primary reference U.S. Government activity |
| 99-4213-01 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-00-941-0150 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-941-0150: Width Across Flats: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN; Head Height: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN; Fastener Length: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN; Thread Length: 0.234 INCHES MINIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.