The Thumbscrew, cataloged under National Stock Number 5305-00-938-9033, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-938-9033 |
| Item Name | Thumbscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.605 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Fastener Length | 1.000 INCHES NOMINAL IN |
| Thread Length | 1.000 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | THUMB NO. 3 |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Width Between Flats | 0.519 INCHES MINIMUM AND 0.549 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 302 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1300C4T16 | 3/2 Design control — primary reference U.S. Government activity |
| FF-T-305C | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-938-9033 is a Thumbscrew, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-959-6879. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-938-9033: Head Height: 0.605 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN; Fastener Length: 1.000 INCHES NOMINAL IN; Thread Length: 1.000 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.