The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-930-0736, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-930-0736 |
| Primary Part Number | SMB447786 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir |
| Status | ACTIVE |
| Hole Configuration Style | ROUND |
| Thread Quantity Per Inch | 40 |
| Internal Drive Style | HEXAGON |
| Head Diameter | 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Thread Length | 0.120 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Material Document and Classification | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| Hardness Rating | 80.0 ROCKWELL B MINIMUM OVERALL |
| Hole Diameter | 0.036 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Head Height | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN |
| Width Across Flats | 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Hole Quantity | 2 |
| Thread Class | 3A A |
| Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL |
| Surface Treatment | PASSIVATE OVERALL |
| Head Style | FLAT CHAMFER |
| Fastener Length | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5305-00-930-0736 is a Screw,cap,socket Head, manufactured by Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-930-0736 has 2 cross-referenced part numbers: 300-2288 (Nimikkeistokeskus Ncb Finland), SMB447786 (Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir).
There is 1 known substitute for 5305-00-930-0736: 2920-00-826-9732. Verify interchangeability with system specifications before substitution.
Key specifications for SMB447786: Hole Configuration Style: ROUND; Thread Quantity Per Inch: 40; Internal Drive Style: HEXAGON; Head Diameter: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN. 23 total characteristics are documented in the Federal Logistics Information System.