The Screw,machine, cataloged under National Stock Number 5305-00-922-9002, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-922-9002 |
| Primary Part Number | 494535 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.822 INCHES NOMINAL IN |
| Thread Length | 0.822 INCHES MINIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 8740 |
| Internal Drive Style | SLOT |
| Countersink Angle | 81.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.462 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 494535 PRIMARY | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA) |
NSN 5305-00-922-9002 is a Screw,machine, manufactured by Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-922-9002 has 1 manufacturer part number on file: 494535 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).
Key specifications for 494535: Screw Surface Treatment: CADMIUM; Fastener Length: 0.822 INCHES NOMINAL IN; Thread Length: 0.822 INCHES MINIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.