The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-00-922-8780, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-922-8780 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN |
| Fastener Length | 2.250 INCHES NOMINAL IN |
| Thread Length | 1.250 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN |
| Hardness Rating | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.062 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS51096-417 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-922-8780 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-939-0609. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-922-8780: Head Height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN; Fastener Length: 2.250 INCHES NOMINAL IN; Thread Length: 1.250 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN; Hardness Rating: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.