The Screw,machine, cataloged under National Stock Number 5305-00-903-5530, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-903-5530 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Thread Length | 0.155 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 36 |
| Thread Series Designator | UNF |
| Head Diameter | 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS51960-43 | 2/2 Government specification standardization U.S. Government activity |
| 003-007861-043 | 5/1 Secondary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple |
NSN 5305-00-903-5530 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-903-5530: Head Height: 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN; Screw Surface Treatment: PASSIVATE; Fastener Length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Thread Length: 0.155 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.