The Setscrew, cataloged under National Stock Number 5305-00-902-4768, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Ge Aviation Systems Llc. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-902-4768 |
| Primary Part Number | 124697-01 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Ge Aviation Systems Llc |
| Status | ACTIVE |
| Point Diameter | 0.054 INCHES NOMINAL IN |
| Width Across Flats | 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN |
| Point Length | 0.156 INCHES NOMINAL IN |
| Fastener Length | 0.406 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.250 INCHES MAXIMUM IN |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 124697-01 PRIMARY | Ge Aviation Systems Llc (USA) |
NSN 5305-00-902-4768 is a Setscrew, manufactured by Ge Aviation Systems Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-902-4768 has 1 manufacturer part number on file: 124697-01 (Ge Aviation Systems Llc).
Key specifications for 124697-01: Point Diameter: 0.054 INCHES NOMINAL IN; Width Across Flats: 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN; Point Length: 0.156 INCHES NOMINAL IN; Fastener Length: 0.406 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.