The Screw,close Tolerance, cataloged under National Stock Number 5305-00-902-4342, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-902-4342 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| Thread Length | 0.363 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1161 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM IN |
| Locking Feature | PATCH OR PELLET OR STRIP THREADS |
| Surface Treatment | CADMIUM AND CHROMATE FASTENER |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | PLASTIC LOCKING FEATURE |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 FASTENER |
| Thread Series Designator | UNJC |
| Head Diameter | 0.269 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| LK1161-3 | 5/9 Secondary reference Torkon Fastener Corp |
| NAS1161-3 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-902-4342 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-902-4342: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.