The Setscrew, cataloged under National Stock Number 5305-00-899-2562, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Triumph Engine Control Systems Llc. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-899-2562 |
| Primary Part Number | 29A30015 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Triumph Engine Control Systems Llc |
| Status | ACTIVE |
| Width Across Flats | 0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN |
| Point Length | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Fastener Length | 0.570 INCHES NOMINAL IN |
| Thread Length | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 3.8 DEGREES MINIMUM AND 4.0 DEGREES MAXIMUM |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 416F OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 29A30015 PRIMARY | Triumph Engine Control Systems Llc (USA) |
NSN 5305-00-899-2562 is a Setscrew, manufactured by Triumph Engine Control Systems Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-899-2562 has 1 manufacturer part number on file: 29A30015 (Triumph Engine Control Systems Llc).
Key specifications for 29A30015: Width Across Flats: 0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN; Point Length: 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN; Fastener Length: 0.570 INCHES NOMINAL IN; Thread Length: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.