PartsTable TECHNICAL DATA SHEET
NSN 5305-00-889-6864Government record, cited

Screw, Close Tolerance5305-00-889-6864

NSN 5305-00-889-6864 · NIIN 008896864 · Part number NAS1203-19
Apcom Inc · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 50568
Government record, cited
NSN 5305-00-889-6864 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-889-6864. Manufacturer of record part number: NAS1203-19.
Also searched as  5305-00-889-6864 · 5305008896864 · NIIN 008896864 · 00-889-6864 · FSC 5305 Screws · CAGE 50568 · NAS1203-19
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.449 INCHES MINIMUM AND 1.479 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
  • Thread Length: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.190 INCHES IN
  • Head Style: FLAT COUNTERSUNK
Identification
  • NSN: 5305-00-889-6864
  • NIIN: 008896864
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: NAS1203-19
  • Manufacturer: Apcom Inc
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-889-6864, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Apcom Inc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 7 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-889-6864
Primary Part NumberNAS1203-19
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerApcom Inc
StatusACTIVE
Fastener Length1.449 INCHES MINIMUM AND 1.479 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Thread Length0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
Grip Diameter0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 4037 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
NAS1203-19 Fairchild Fasteners Europe - Vsd Gmbh (DEU)
NAS1203-19 PRIMARY Apcom Inc (USA)
NAS1203-19 PRIMARY Eriks Southwest Inc Dba Montclair Enterprises (USA)
NAS1203-19 Nor-Cal Supply Co (USA)
NAS1203-19 PRIMARY Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN)
NAS1203-19 PRIMARY Hi-Shear Corporation (USA)
NAS1203-19 Leonardo Spa Aeronautics Division - Pomigliano D'arco Site (ITA)
Reference documents
ReferenceMeaning
NAS1203-19 5/9 Secondary reference
Collins Engineering Corp
NAS1203-19 5/9 Secondary reference
Lawrence Engineering and Supply Inc
NAS1203-19 5/9 Secondary reference
F and C Sales Inc
NAS1203-19 3/2 Design control — primary reference
U.S. Government activity
NAS1203-19 5/9 Secondary reference
U.S. Government activity
NAS1203-19 3/2 Design control — primary reference
U.S. Government activity
NAS1203-19 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
NAS1203-19 5/9 Secondary reference
Air Industries Co Inc
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-889-6864?

NSN 5305-00-889-6864 is a Screw,close Tolerance, manufactured by Apcom Inc, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-889-6864?

NSN 5305-00-889-6864 has 7 manufacturer part numbers on file: NAS1203-19 (Fairchild Fasteners Europe - Vsd Gmbh), NAS1203-19 (Apcom Inc), NAS1203-19 (Eriks Southwest Inc Dba Montclair Enterprises), NAS1203-19 (Nor-Cal Supply Co), NAS1203-19 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc) and 2 more.

What are the specifications of NAS1203-19?

Key specifications for NAS1203-19: Fastener Length: 1.449 INCHES MINIMUM AND 1.479 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL; Thread Length: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-889-6864 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com