The Screw,machine, cataloged under National Stock Number 5305-00-882-2242, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-882-2242 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.750 INCHES NOMINAL IN |
| Screw Material Document and Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.679 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 28 |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Head Hole Configuration Style | ROUND |
| Hole Diameter | 0.062 INCHES NOMINAL IN |
| Head Diameter | 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35266-81 | 2/2 Government specification standardization U.S. Government activity |
| AN501A416-12 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-00-882-2242 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-882-2242: Head Height: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.750 INCHES NOMINAL IN; Screw Material Document and Classification: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.