The Setscrew, cataloged under National Stock Number 5305-00-880-9704, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-880-9704 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.073 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN |
| Width Across Flats | 0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Point Length | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Fastener Length | 0.810 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-763 300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 859770-1 | 5/9 Secondary reference Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road) |
| 859770-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-880-9704 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-880-9704: Point Diameter: 0.073 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN; Width Across Flats: 0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN; Point Length: 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN; Fastener Length: 0.810 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.