PartsTable TECHNICAL DATA SHEET
NSN 5305-00-844-2459Government record, cited

Screw, Close Tolerance5305-00-844-2459

NSN 5305-00-844-2459 · NIIN 008442459
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-844-2459 · 5305008442459 · NIIN 008442459 · 00-844-2459 · FSC 5305 Screws · NAS1204-34D · NAS1204-34D · NAS1204-34D · NAS1204-34D · NAS1204-34D
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 2.426 INCHES MINIMUM AND 2.456 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
  • Thread Length: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.250 INCHES IN
Identification
  • NSN: 5305-00-844-2459
  • NIIN: 008442459
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-844-2459, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 12 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-844-2459
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Fastener Length2.426 INCHES MINIMUM AND 2.456 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Thread Length0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
Grip Diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNF
Distance From Head Largest Bearing Surface to Shank Hole Center2.300 INCHES MINIMUM AND 2.350 INCHES MAXIMUM FIRST HOLE IN
Head Diameter0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS1204-34D 5/9 Secondary reference
Lawrence Engineering and Supply Inc
NAS1204-34D 5/9 Secondary reference
Collins Engineering Corp
NAS1204-34D 5/9 Secondary reference
Nor-Cal Supply Co
NAS1204-34D 3/2 Design control — primary reference
U.S. Government activity
NAS1204-34D 5/9 Secondary reference
F and C Sales Inc
NAS1204-34D 5/9 Secondary reference
Eriks Southwest Inc Dba Montclair Enterprises
NAS1204-34D 5/9 Secondary reference
U.S. Government activity
NAS1204-34D 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
NAS1204-34D 5/9 Secondary reference
Hi-Shear Corporation
NAS1204-34D 5/9 Secondary reference
Apcom Inc
NAS1204-34D 5/9 Secondary reference
Air Industries Co Inc
NAS1204-34D 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-844-2459?

NSN 5305-00-844-2459 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-844-2459?

Key specifications for 5305-00-844-2459: Fastener Length: 2.426 INCHES MINIMUM AND 2.456 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL; Thread Length: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-844-2459 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com