The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-840-8352, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 16 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-840-8352 |
| Primary Part Number | NAS1190-04P5N |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.231 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1190 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Locking Feature | PELLET THREADS |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1190-04P5N PRIMARY | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| NAS1190-04P5N | 5/9 Secondary reference Apcom Inc |
| NAS1190-04P5N | 3/2 Design control — primary reference U.S. Government activity |
| NAS1190-04P5N | 5/9 Secondary reference Long-Lok Llc |
| NAS1190-04P5N | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
| NAS1190-04P5N | 5/9 Secondary reference U.S. Government activity |
| NAS1190-04P5N | 5/9 Secondary reference Fastener Innovation Technology, Inc. Dba F I T |
| NAS1190-04P5N | 5/9 Secondary reference Air Industries Co Inc |
| NAS1190-04P5N | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1190-04P5N | 5/9 Secondary reference U.S. Government activity |
| NAS1190-04P5N | 5/9 Secondary reference Hi-Shear Corporation |
| NAS1190-04P5N | 5/9 Secondary reference F and C Sales Inc |
| NAS1190-04P5N | 5/9 Secondary reference Nor-Cal Supply Co |
| NAS1190-04P5N | 5/9 Secondary reference Nd Industries Inc Div Eastern Division |
| NAS1190-04P5N | 5/9 Secondary reference Plastic and Metal Products Corporation |
| NAS1190-04P5N | 5/9 Secondary reference Hardware Specialty Co. Inc. Dba Hardware Specialty Co Inc |
| NAS1190-04P5N | 5/9 Secondary reference U.S. Government activity |
NSN 5305-00-840-8352 is a Screw,cap,socket Head, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-840-8352 has 1 manufacturer part number on file: NAS1190-04P5N (Huck International, Inc).
Key specifications for NAS1190-04P5N: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.