The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-00-823-5907, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-823-5907 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN |
| Fastener Length | 1.000 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.812 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Surface Treatment | OXIDE FILM AND ANODIZE OVERALL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 16 |
| Material | ALUMINUM ALLOY 2024 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35313-60 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-823-5907 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-823-5907: Head Height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN; Fastener Length: 1.000 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Thread Length: 0.812 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.