The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-00-809-7994, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-809-7994 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN |
| Fastener Length | 2.500 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 2.000 INCHES MINIMUM AND 2.281 INCHES MAXIMUM IN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.875 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 1.285 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN |
| Surface Treatment | PHOSPHATE OVERALL |
| Minimum Tensile Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 120000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 14 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.125 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS51098-187 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-809-7994 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-809-7994: Head Height: 0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN; Fastener Length: 2.500 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 2.000 INCHES MINIMUM AND 2.281 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.