The Screw,close Tolerance, cataloged under National Stock Number 5305-00-807-9673, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-807-9673 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.220 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN |
| Fastener Length | 1.437 INCHES MINIMUM AND 1.484 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Designator | AS MODIFIED BY RQMT FOR ENVIRONMENTAL TEST IN ACCORDANCE W/SPECIAL PROJECTS FBM PLAN OP2747 |
| Specification/standard Data | 80205-NAS336 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN |
| Grip Diameter | 0.3731 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.750 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS336CA13 | 3/1 Design control — primary reference U.S. Government activity |
NSN 5305-00-807-9673 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-807-9673: Width Across Flats: 0.220 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN; Fastener Length: 1.437 INCHES MINIMUM AND 1.484 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.