The Screw,machine, cataloged under National Stock Number 5305-00-766-7653, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-766-7653 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Extended Washer Thickness | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| Head Height | 0.250 INCHES NOMINAL IN |
| Bearing Surface of Head Surface Finish | 63.0 MICROINCHES |
| Fastener Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE |
| Extended Washer Diameter | 0.312 INCHES NOMINAL IN |
| Thread Length | 0.313 INCHES MINIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | DOUBLE HEXAGON EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.212 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| Screw Material | IRON ALLOY 660 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| R1057P4 | 3/2 Design control — primary reference U.S. Government activity |
| R1057P4 | 5/9 Secondary reference General Electric Company |
NSN 5305-00-766-7653 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-766-7653: Extended Washer Thickness: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN; Head Height: 0.250 INCHES NOMINAL IN; Bearing Surface of Head Surface Finish: 63.0 MICROINCHES; Fastener Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.