The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-763-6014, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-763-6014 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.064 INCHES NOMINAL IN |
| Head Height | 0.051 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN |
| Fastener Length | 0.375 INCHES NOMINAL IN |
| Spline Width | 0.018 INCHES NOMINAL IN |
| Thread Length | 0.375 INCHES MAXIMUM IN |
| Spline Major Diameter | 0.074 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | BUTTON |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.201 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 92531040600 | 3/2 Design control — primary reference U.S. Government activity |
| 92531040600 | 5/9 Secondary reference Honeywell Intl Inc Defense Avionics Systems |
| 92531040600 | 5/9 Secondary reference Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems |
NSN 5305-00-763-6014 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-763-6014: Spline Minor Diameter: 0.064 INCHES NOMINAL IN; Head Height: 0.051 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN; Fastener Length: 0.375 INCHES NOMINAL IN; Spline Width: 0.018 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.