The Screw,machine, cataloged under National Stock Number 5305-00-754-1724, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-754-1724 |
| Primary Part Number | 9019673 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.719 INCHES NOMINAL IN |
| Screw Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.469 INCHES MINIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP E4340 |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNF |
| Head Diameter | 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9019673 PRIMARY | Us Army Aviation and Missile Command (USA) |
NSN 5305-00-754-1724 is a Screw,machine, manufactured by Us Army Aviation and Missile Command, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-754-1724 has 1 manufacturer part number on file: 9019673 (Us Army Aviation and Missile Command).
Key specifications for 9019673: Screw Surface Treatment: CADMIUM; Fastener Length: 0.719 INCHES NOMINAL IN; Screw Material Document and Classification: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.469 INCHES MINIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.