The Screw,close Tolerance, cataloged under National Stock Number 5305-00-754-0989, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Apcom Inc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 6 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-754-0989 |
| Primary Part Number | NAS1209-10W |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Apcom Inc |
| Status | ACTIVE |
| Fastener Length | 1.121 INCHES MINIMUM AND 1.151 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.486 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.562 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1209 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Grip Diameter | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 1.087 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1209-10W PRIMARY | Apcom Inc (USA) |
| NAS1209-10W PRIMARY | Eriks Southwest Inc Dba Montclair Enterprises (USA) |
| NAS1209-10W | Fairchild Fasteners Europe - Vsd Gmbh (DEU) |
| NAS1209-10W PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| NAS1209-10W PRIMARY | Hi-Shear Corporation (USA) |
| NAS1209-10W | Nor-Cal Supply Co (USA) |
| Reference | Meaning |
|---|---|
| NAS1209-10W | 5/9 Secondary reference Collins Engineering Corp |
| NAS1209-10W | 5/9 Secondary reference Air Industries Co Inc |
| NAS1209-10W | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
| NAS1209-10W | 5/9 Secondary reference U.S. Government activity |
| NAS1209-10W | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1209-10W | 3/2 Design control — primary reference U.S. Government activity |
| NAS1209-10W | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-754-0989 is a Screw,close Tolerance, manufactured by Apcom Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-754-0989 has 6 manufacturer part numbers on file: NAS1209-10W (Apcom Inc), NAS1209-10W (Eriks Southwest Inc Dba Montclair Enterprises), NAS1209-10W (Fairchild Fasteners Europe - Vsd Gmbh), NAS1209-10W (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), NAS1209-10W (Hi-Shear Corporation) and 1 more.
Key specifications for NAS1209-10W: Fastener Length: 1.121 INCHES MINIMUM AND 1.151 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.486 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.