The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-753-4041, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-753-4041 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.188 INCHES NOMINAL IN |
| Head Height | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Fastener Length | 0.484 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Thread Length | 0.384 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Material Document and Classification | QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 1 TYPE |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 40000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | NICKEL ALLOY 400 OVERALL |
| Hole Quantity | 2 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.047 INCHES NOMINAL IN |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-86 | 4/1 Identification reference U.S. Government activity |
| 40-1219-4PC12 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-00-753-4041 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-753-4041: Width Across Flats: 0.188 INCHES NOMINAL IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 0.484 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Thread Length: 0.384 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.