The Setscrew, cataloged under National Stock Number 5305-00-734-7173, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-734-7173 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.0350 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN |
| Point Length | 0.021 INCHES NOMINAL IN |
| Fastener Length | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 BLACK FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.167 INCHES NOMINAL IN |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AISI ASSN STD ALL MATERIAL RESPONSES OVERALL |
| Point Chamfer Angle | 90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 56 |
| Material | STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 691C748P3 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-734-7173 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-734-7173: Width Across Flats: 0.0350 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN; Point Length: 0.021 INCHES NOMINAL IN; Fastener Length: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 BLACK FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.