The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-720-7944, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-720-7944 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 0.625 INCHES NOMINAL IN |
| Thread Length | 0.558 INCHES MINIMUM IN |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLAT COUNTERSUNK |
| Nondefinitive Spec/std Data | 4 TYPE |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 130000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Material | STEEL OVERALL |
| Head Diameter | 0.600 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FFS86TYPE1STYLE13 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-720-7944 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
2 possible matches (shared part number, not a government interchangeability claim): 5305-00-721-5506, 5305-00-973-0412. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-720-7944: Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 0.625 INCHES NOMINAL IN; Thread Length: 0.558 INCHES MINIMUM IN; Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.