The Setscrew, cataloged under National Stock Number 5305-00-707-3675, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Rolls-Royce Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-707-3675 |
| Primary Part Number | 6791270 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Rolls-Royce Corporation |
| Status | ACTIVE |
| Point Diameter | 0.375 INCHES NOMINAL IN |
| Head Height | 0.125 INCHES NOMINAL IN |
| Point Length | 1.222 INCHES MINIMUM AND 1.232 INCHES MAXIMUM IN |
| Fastener Length | 1.892 INCHES MINIMUM AND 1.902 INCHES MAXIMUM IN |
| Thread Length | 0.570 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 45.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | OXIDE OVERALL |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 8735 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 1.156 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5305-00-707-3675 is a Setscrew, manufactured by Rolls-Royce Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-707-3675 has 2 manufacturer part numbers on file: 6791270 (Rolls-Royce Corporation), 6791270 (General Motors Corp).
Key specifications for 6791270: Point Diameter: 0.375 INCHES NOMINAL IN; Head Height: 0.125 INCHES NOMINAL IN; Point Length: 1.222 INCHES MINIMUM AND 1.232 INCHES MAXIMUM IN; Fastener Length: 1.892 INCHES MINIMUM AND 1.902 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.