The Screw,machine, cataloged under National Stock Number 5305-00-655-6954, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-655-6954 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.022 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.125 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.073 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 72 |
| Thread Series Designator | UNF |
| Head Diameter | 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7200163 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MS35250-6 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-655-6954 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-655-6954: Head Height: 0.022 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN; Screw Surface Treatment: PASSIVATE; Fastener Length: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.