The Screw,machine, cataloged under National Stock Number 5305-00-655-6542, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-655-6542 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.609 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Length | 0.514 INCHES MINIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 4037 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE SET |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 51B507-3-10 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
| 51B507-3-10 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector |
NSN 5305-00-655-6542 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-655-6542: Screw Surface Treatment: CADMIUM; Fastener Length: 0.609 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE; Thread Length: 0.514 INCHES MINIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.