The Screw,close Tolerance, cataloged under National Stock Number 5305-00-606-9496, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-606-9496 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Head Height | 0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Fastener Length | 1.101 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.352 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Grip Diameter | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Thread Class | 3A A |
| Material | STEEL COMP 630 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.722 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CA2652-06-09 | 5/9 Secondary reference Howmet Global Fastening Systems Inc. Div Tridair Products |
| MS21125-0609 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-606-9496 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-606-9496: Surface Finish: 32.0 MICROINCHES GRIP; Head Height: 0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN; Fastener Length: 1.101 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.