The Setscrew, cataloged under National Stock Number 5305-00-582-9486, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-582-9486 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Fastener Length | 0.250 INCHES NOMINAL IN |
| Thread Length | 0.250 INCHES MAXIMUM IN |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN565A1032H4 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-582-9486 is a Setscrew, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-827-1984. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-582-9486: Width Across Flats: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN; Fastener Length: 0.250 INCHES NOMINAL IN; Thread Length: 0.250 INCHES MAXIMUM IN; Hardness Rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.