The Screw,externally Relieved Body, cataloged under National Stock Number 5305-00-554-6496, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-554-6496 |
| Item Name | Screw,externally Relieved Body |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.080 INCHES NOMINAL IN |
| Fastener Length | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| First Diameter From Head | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | PAN NO. 2 |
| Thread Direction | RIGHT-HAND |
| Distance From Largest Bearing Surface of Head to End of First Diameter | 0.250 INCHES NOMINAL IN |
| Externally Relieved Body Diameter Quantity | 1 |
| Surface Treatment | OXIDE OVERALL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.219 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7250004-2 | 3/9 Design control — primary reference Mcdonnell Douglas Corp Mcdonnell Douglas Aerospace Opns West |
NSN 5305-00-554-6496 is a Screw,externally Relieved Body, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-554-6496: Head Height: 0.080 INCHES NOMINAL IN; Fastener Length: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.