PartsTable TECHNICAL DATA SHEET
NSN 5305-00-551-7600Government record, cited

Screw, Cap, Socket Head5305-00-551-7600

NSN 5305-00-551-7600 · NIIN 005517600
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-551-7600 · 5305005517600 · NIIN 005517600 · 00-551-7600 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
  • Head Height: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
  • Fastener Length: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Identification
  • NSN: 5305-00-551-7600
  • NIIN: 005517600
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-551-7600, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-551-7600
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish63.0 MICROINCHES GRIP
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Width Across Flats0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
Head Height0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
Fastener Length1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.615 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN
Hardness Rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
Hole Configuration StyleROUND LONGITUDINAL HOLE
Material Document and ClassificationAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength125000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL COMP 8740 OVERALL
Hole Quantity6
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.047 INCHES NOMINAL IN
Head Diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
AN148573 2/2 Government specification standardization
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-551-7600?

NSN 5305-00-551-7600 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-551-7600?

Key specifications for 5305-00-551-7600: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. 25 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-551-7600 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com