PartsTable TECHNICAL DATA SHEET
NSN 5305-00-541-0770Government record, cited

Screw, Close Tolerance5305-00-541-0770

NSN 5305-00-541-0770 · NIIN 005410770 · Part number 3MFR1221-4-9T
The Boeing Company Div Defense · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 76301
Government record, cited
NSN 5305-00-541-0770 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-541-0770. Manufacturer of record part number: 3MFR1221-4-9T.
Also searched as  5305-00-541-0770 · 5305005410770 · NIIN 005410770 · 00-541-0770 · FSC 5305 Screws · CAGE 76301 · 3MFR1221-4-9T
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES OVERALL
  • Fastener Length: 0.973 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND PS 13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE OVERALL
  • Thread Length: 0.501 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.250 INCHES IN
Identification
  • NSN: 5305-00-541-0770
  • NIIN: 005410770
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 3MFR1221-4-9T
  • Manufacturer: The Boeing Company Div Defense
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-541-0770, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-541-0770
Primary Part Number3MFR1221-4-9T
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerThe Boeing Company Div Defense
StatusACTIVE
Surface Finish32.0 MICROINCHES OVERALL
Fastener Length0.973 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2 CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND PS 13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE OVERALL
Thread Length0.501 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
Grip Diameter0.2470 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND PRIMER OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHIGH-TORQUE
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNJC
Head Diameter0.461 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
3MFR1221-4-9T PRIMARY The Boeing Company Div Defense (USA)
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-541-0770?

NSN 5305-00-541-0770 is a Screw,close Tolerance, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-541-0770?

NSN 5305-00-541-0770 has 1 manufacturer part number on file: 3MFR1221-4-9T (The Boeing Company Div Defense).

What are the specifications of 3MFR1221-4-9T?

Key specifications for 3MFR1221-4-9T: Surface Finish: 32.0 MICROINCHES OVERALL; Fastener Length: 0.973 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND PS 13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE OVERALL; Thread Length: 0.501 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-541-0770 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com