Nearby stock numbers← 5305-00-536-6828 Screw, Close Tolerance
·
5305-00-536-6830 Screw, Close Tolerance →
5305-00-536-6829 — Screws
Features
Screw,close Tolerance — FSC 5305
Surface Finish: 32.0 MICROINCHES GRIP
Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height: 0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
Fastener Length: 2.039 INCHES MINIMUM AND 2.059 INCHES MAXIMUM IN
Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length: 0.352 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
Identification
NSN: 5305-00-536-6829
NIIN: 005366829
FSC: 5305 — Screws
FSG: 53 — Hardware and Abrasives
General Description
The Screw,close Tolerance, cataloged under National Stock Number 5305-00-536-6829, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 8 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
Technical Specifications
Parameter
Value
NSN
5305-00-536-6829
Item Name
Screw,close Tolerance
FSC / FSG
5305 / 53 — Screws
Status
ACTIVE
Surface Finish
32.0 MICROINCHES GRIP
Surface Finish
32.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height
0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
Fastener Length
2.039 INCHES MINIMUM AND 2.059 INCHES MAXIMUM IN
Surface Treatment Document and Classification
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length
0.352 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
Shank Unthreaded Hole Diameter
0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
Material Document and Classification
AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter
0.375 INCHES IN
Head Style
CROWNED HEXAGON
Thread Direction
RIGHT-HAND
Grip Length
1.500 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
Width Between Flats
0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
Grip Diameter
0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN
Surface Treatment
PASSIVATE OVERALL
Internal Drive Style
SLOT
Thread Class
3A A
Thread Quantity Per Inch
24
Material
STEEL COMP XM-13 OVERALL
Thread Series Designator
UNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center
1.911 INCHES MINIMUM AND 1.931 INCHES MAXIMUM FIRST HOLE IN
Lifecycle & Compliance
Acquisition Status
ACTIVE
DEMIL Code
DEMIL A — No Demilitarization Required
Hazard
No hazard code in the DLA record (HMIC N)
Criticality Code
X
⇄Related Items8
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-011-7018NASM3369B422POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-011-7019MS3369B425POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-012-8929MS3369B418POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-014-1419MS3369B539POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-043-1370MS3369B529POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-160-0336POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)
5305-01-160-3957NASM3369POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-186-3102NASM3369B316POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
Reference
Meaning
NASM3369
D/9Drawing number reference only
U.S. Government activity
MS3369B624
3/2Design control — primary reference
U.S. Government activity
AS254B6-24
5/9Secondary reference
U.S. Government activity
MS3369B624
5/9Secondary reference
U.S. Government activity
CA2658-6-24
5/9Secondary reference
Howmet Global Fastening Systems Inc. Div Tridair Products
AS169-6-24
5/9Secondary reference
U.S. Government activity
Related Parts
5305-01-011-7018POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NASM3369B422
5305-01-011-7019POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
MS3369B425
5305-01-012-8929POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
MS3369B418
5305-01-014-1419POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
MS3369B539
5305-01-043-1370POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
MS3369B529
5305-01-160-0336POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
5305-01-160-3957POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NASM3369
5305-01-186-3102POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NASM3369B316
Frequently Asked Questions
What is NSN 5305-00-536-6829?
NSN 5305-00-536-6829 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
What NSN replaces 5305-00-536-6829?
8 possible matches (shared part number, not a government interchangeability claim): 5305-01-011-7018, 5305-01-011-7019, 5305-01-012-8929. Verify interchangeability with system specifications before substitution.
What are the specifications of 5305-00-536-6829?
Key specifications for 5305-00-536-6829: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN; Fastener Length: 2.039 INCHES MINIMUM AND 2.059 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
Is NSN 5305-00-536-6829 hazardous material?
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
Sources
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.