The Screw,close Tolerance, cataloged under National Stock Number 5305-00-512-6433, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Div Tridair Products. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-512-6433 |
| Primary Part Number | CA2654-3-12 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc. Div Tridair Products |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| Fastener Length | 1.122 INCHES MINIMUM AND 1.142 INCHES MAXIMUM IN |
| Thread Length | 0.262 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | PAN NO. 2 |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.829 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN |
| Grip Diameter | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.043 INCHES MINIMUM AND 1.059 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| CA2654-3-12 PRIMARY | Howmet Global Fastening Systems Inc. Div Tridair Products (USA) |
| Reference | Meaning |
|---|---|
| AS126-3-12 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-00-512-6433 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc. Div Tridair Products, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-512-6433 has 1 manufacturer part number on file: CA2654-3-12 (Howmet Global Fastening Systems Inc. Div Tridair Products).
Key specifications for CA2654-3-12: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN; Fastener Length: 1.122 INCHES MINIMUM AND 1.142 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.