PartsTable TECHNICAL DATA SHEET
NSN 5305-00-512-6300Government record, cited

Screw, Close Tolerance5305-00-512-6300

NSN 5305-00-512-6300 · NIIN 005126300 · Part number CA2654-5-12
Howmet Global Fastening Systems Inc. Div Tridair Products · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 29372
Government record, cited
NSN 5305-00-512-6300 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-512-6300. Manufacturer of record part number: CA2654-5-12.
Also searched as  5305-00-512-6300 · 5305005126300 · NIIN 005126300 · 00-512-6300 · FSC 5305 Screws · CAGE 29372 · CA2654-5-12 · AS126-5-12
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Head Height: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
  • Fastener Length: 1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.306 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
  • Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
Identification
  • NSN: 5305-00-512-6300
  • NIIN: 005126300
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: CA2654-5-12
  • Manufacturer: Howmet Global Fastening Systems Inc. Div Tridair Products
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-512-6300, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Div Tridair Products. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-512-6300
Primary Part NumberCA2654-5-12
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerHowmet Global Fastening Systems Inc. Div Tridair Products
StatusACTIVE
Surface Finish63.0 MICROINCHES GRIP
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
Fastener Length1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.306 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
Shank Unthreaded Hole Diameter0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.312 INCHES IN
Head StylePAN NO. 2
Thread DirectionRIGHT-HAND
Grip Length0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
Grip Diameter0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleSLOT
Thread Class3A A
Thread Quantity Per Inch24
MaterialIRON ALLOY 660 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM FIRST HOLE IN
Head Diameter0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5306-00-512-6312CA2654-4-21 POSSIBLE MATCH
BOLT
Possible match (shared part number)Howmet Global Fastening Systems Inc. Div Tridair Products
Cross-Reference Index
Part NumberManufacturer
CA2654-5-12 PRIMARY Howmet Global Fastening Systems Inc. Div Tridair Products (USA)
Reference documents
ReferenceMeaning
AS126-5-12 5/2 Secondary reference
U.S. Government activity
Related Parts
5306-00-512-6312POSSIBLE MATCH
BOLT
CA2654-4-21

Frequently Asked Questions

What is NSN 5305-00-512-6300?

NSN 5305-00-512-6300 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc. Div Tridair Products, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-512-6300?

NSN 5305-00-512-6300 has 1 manufacturer part number on file: CA2654-5-12 (Howmet Global Fastening Systems Inc. Div Tridair Products).

What NSN replaces 5305-00-512-6300?

1 possible match (shared part number, not a government interchangeability claim): 5306-00-512-6312. Verify interchangeability with system specifications before substitution.

What are the specifications of CA2654-5-12?

Key specifications for CA2654-5-12: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN; Fastener Length: 1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-512-6300 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com