The Screw,close Tolerance, cataloged under National Stock Number 5305-00-512-5263, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-512-5263 |
| Primary Part Number | LS15235C6-19D |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Fastener Length | 1.564 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.434 INCHES MINIMUM AND 1.484 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.692 INCHES MINIMUM AND 0.763 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| LS15235C6-19D PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| LS15235C6-19D PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| LS15235C6-19D PRIMARY | Huck International, Inc (USA) |
| LS15235C6-19D PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| LS15235C6-19D | 5/9 Secondary reference Sps Technologies Inc |
| LS15235C6-19D | 3/2 Design control — primary reference U.S. Government activity |
| LS15235C6-19D | 1/2 Source control — Government-approved source U.S. Government activity |
NSN 5305-00-512-5263 is a Screw,close Tolerance, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-512-5263 has 4 manufacturer part numbers on file: LS15235C6-19D (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), LS15235C6-19D (Sps Technologies, Llc Dba PB Fasteners), LS15235C6-19D (Huck International, Inc), LS15235C6-19D (Hi-Shear Corporation).
Key specifications for LS15235C6-19D: Fastener Length: 1.564 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.