The Setscrew, cataloged under National Stock Number 5305-00-497-7311, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-497-7311 |
| Primary Part Number | 2578832-001A |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Goodrich Corporation |
| Status | ACTIVE |
| Point Diameter | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Head Height | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Point Length | 0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN |
| Fastener Length | 2.685 INCHES MINIMUM AND 2.715 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | FACP-0400 TY 2 FSCM 06848 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.330 INCHES MAXIMUM IN |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | CE-0906 FSCM 06848 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Width Between Flats | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-T-6870 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 2578832-001A PRIMARY | Goodrich Corporation (USA) |
| Reference | Meaning |
|---|---|
| 2578832-001A | 3/9 Design control — primary reference Goodrich Corp Dba Goodrich Corp |
| 2578832-001A | 5/9 Secondary reference Honeywell International Inc. Dba Honeywell Div Aerospace-South Bend (westmoor St) |
| 2578832-001A | C/1 Advisory reference — outside the item-of-supply concept Honeywell International Inc Div Aerospace-South Bend (bendix Dr) |
NSN 5305-00-497-7311 is a Setscrew, manufactured by Goodrich Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-497-7311 has 1 manufacturer part number on file: 2578832-001A (Goodrich Corporation).
Key specifications for 2578832-001A: Point Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Head Height: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN; Point Length: 0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN; Fastener Length: 2.685 INCHES MINIMUM AND 2.715 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.