PartsTable TECHNICAL DATA SHEET
NSN 5305-00-489-1136Government record, cited

Screw Assembly, Panel5305-00-489-1136

NSN 5305-00-489-1136 · NIIN 004891136 · Part number 7118640-55
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 06481
Government record, cited
NSN 5305-00-489-1136 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-489-1136. Manufacturer of record part number: 7118640-55.
Also searched as  5305-00-489-1136 · 5305004891136 · NIIN 004891136 · 00-489-1136 · FSC 5305 Screws · CAGE 06481 · 7118640-55 · DRB7500-10B5 · 16610176-004 · 11778492-55
Nearby stock numbers  ·
Features
  • Screw Assembly,panel — FSC 5305
  • Head Height: 0.520 INCHES NOMINAL IN
  • Fastener Length: 0.812 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
  • Surface Treatment Document and Classification: MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
  • Surface Treatment Document and Classification: MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
  • Material Accommodated Thickness: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
Identification
  • NSN: 5305-00-489-1136
  • NIIN: 004891136
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 7118640-55
  • Manufacturer: Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp
General Description

The Screw Assembly,panel, cataloged under National Stock Number 5305-00-489-1136, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-489-1136
Primary Part Number7118640-55
Item NameScrew Assembly,panel
FSC / FSG5305 / 53 — Screws
ManufacturerNorthrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp
StatusACTIVE
Head Height0.520 INCHES NOMINAL IN
Fastener Length0.812 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
Surface Treatment Document and ClassificationMIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
Surface Treatment Document and ClassificationMIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
Material Accommodated Thickness0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
Material Document and ClassificationQQ-A-225/8 TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE HEAD
Material Document and ClassificationQQ-A-225/8 TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
Material Document and ClassificationQQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING
Material Document and ClassificationASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Surface TreatmentANODIZE STAND-OFF
Surface TreatmentPASSIVATE FASTENER
Surface TreatmentPASSIVATE SPRING
Surface TreatmentANODIZE HEAD
Internal Drive StyleSLOT
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL COMP 302 SPRING
MaterialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
MaterialALUMINUM ALLOY 6061 STAND-OFF
MaterialALUMINUM ALLOY 6061 HEAD
Thread Series DesignatorUNF
Head Diameter0.451 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
7118640-55 PRIMARY Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp (USA)
DRB7500-10B5 PRIMARY Huck International, Inc. Div Huck Products Division (USA)
Reference documents
ReferenceMeaning
DRB7500-10B5 7/2 Vendor item drawing reference
Huck International, Inc
16610176-004 7/2 Vendor item drawing reference
Sypris Electronics, Llc Div Sypris Electronics, Llc - Colorado Field Services
7118640-55 5/9 Secondary reference
Litton Systems Inc Guidance and Control Systems Div
11778492-55 7/2 Vendor item drawing reference
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
DRB7500-10B5 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-489-1136?

NSN 5305-00-489-1136 is a Screw Assembly,panel, manufactured by Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-489-1136?

NSN 5305-00-489-1136 has 2 manufacturer part numbers on file: 7118640-55 (Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp), DRB7500-10B5 (Huck International, Inc. Div Huck Products Division).

What are the specifications of 7118640-55?

Key specifications for 7118640-55: Head Height: 0.520 INCHES NOMINAL IN; Fastener Length: 0.812 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER; Surface Treatment Document and Classification: MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-489-1136 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com