The Setscrew, cataloged under National Stock Number 5305-00-485-2389, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-485-2389 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.121 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN |
| Head Height | 0.175 INCHES NOMINAL IN |
| Point Length | 0.200 INCHES NOMINAL IN |
| Fastener Length | 3.820 INCHES NOMINAL3.820 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 1 CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 3.273 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-7097 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6875 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | SPLINE DRIVE SHEAR HEAD |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Width Between Flats | 0.308 INCHES MINIMUM AND 0.308 INCHES MINIMUM AND 0.311 INCHES MAXIMUM0.311 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 1020 OR STEEL COMP 4130 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 42132-372 | 3/9 Design control — primary reference Goodrich Corporation Dba Trw Lucas Aerospace |
| 42132D372 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-00-485-2389 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-485-2389: Point Diameter: 0.121 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN; Head Height: 0.175 INCHES NOMINAL IN; Point Length: 0.200 INCHES NOMINAL IN; Fastener Length: 3.820 INCHES NOMINAL3.820 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.