The Screw,close Tolerance, cataloged under National Stock Number 5305-00-478-9983, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-478-9983 |
| Primary Part Number | SFT930-3-8 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 0.720 INCHES MINIMUM AND 0.736 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| Thread Length | 0.210 INCHES MINIMUM AND 0.277 INCHES MAXIMUM IN |
| Hardness Rating | 55.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | VASCO JET M-A FSCM 87665 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM IN |
| Surface Treatment | NICKEL AND CADMIUM OVERALL |
| Minimum Tensile Strength | 300000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | VANADIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| SFT930-3-8 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| AIC79-3-8 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| C079-3-8 | 7/2 Vendor item drawing reference U.S. Government activity |
| VS2787T3C8 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-478-9983 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-478-9983 has 2 manufacturer part numbers on file: SFT930-3-8 (Sps Technologies, Llc Dba PB Fasteners), AIC79-3-8 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company).
Key specifications for SFT930-3-8: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.720 INCHES MINIMUM AND 0.736 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.