PartsTable TECHNICAL DATA SHEET
NSN 5305-00-478-2747Government record, cited

Setscrew5305-00-478-2747

NSN 5305-00-478-2747 · NIIN 004782747 · Part number 2578834-001A
Goodrich Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 6K4C8
Government record, cited
NSN 5305-00-478-2747 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-478-2747. Manufacturer of record part number: 2578834-001A.
Also searched as  5305-00-478-2747 · 5305004782747 · NIIN 004782747 · 00-478-2747 · FSC 5305 Screws · CAGE 6K4C8 · 2578834-001A
Nearby stock numbers  ·
Features
  • Setscrew — FSC 5305
  • Point Diameter: 0.240 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
  • Head Height: 0.170 INCHES NOMINAL IN
  • Fastener Length: 0.350 INCHES NOMINAL IN
  • Thread Length: 0.180 INCHES MAXIMUM0.180 INCHES MAXIMUM IN
  • Hole Configuration Style: HEXAGON LONGITUDINAL HOLEHEXAGON LONGITUDINAL HOLE
  • Point Chamfer Angle: 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
  • Nominal Thread Diameter: 0.312 INCHES IN
Identification
  • NSN: 5305-00-478-2747
  • NIIN: 004782747
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 2578834-001A
  • Manufacturer: Goodrich Corporation
General Description

The Setscrew, cataloged under National Stock Number 5305-00-478-2747, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-478-2747
Primary Part Number2578834-001A
Item NameSetscrew
FSC / FSG5305 / 53 — Screws
ManufacturerGoodrich Corporation
StatusACTIVE
Point Diameter0.240 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
Head Height0.170 INCHES NOMINAL IN
Fastener Length0.350 INCHES NOMINAL IN
Thread Length0.180 INCHES MAXIMUM0.180 INCHES MAXIMUM IN
Hole Configuration StyleHEXAGON LONGITUDINAL HOLEHEXAGON LONGITUDINAL HOLE
Point Chamfer Angle45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
Nominal Thread Diameter0.312 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Point StyleFLAT
Width Between Flats0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Minimum Tensile Strength125000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1CROSS RECESS TYPE 1
Thread Class3A3A
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch24
MaterialSTEEL COMP 4140 OR STEEL OVERALL
Hole Quantity1
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.060 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2578834-001A PRIMARY Goodrich Corporation (USA)
Reference documents
ReferenceMeaning
2578834-001A C/1 Advisory reference — outside the item-of-supply concept
Honeywell International Inc Div Aerospace-South Bend (bendix Dr)
2578834-001A 3/9 Design control — primary reference
Goodrich Corp Dba Goodrich Corp
2578834-001A 5/9 Secondary reference
Honeywell International Inc. Dba Honeywell Div Aerospace-South Bend (westmoor St)
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-478-2747?

NSN 5305-00-478-2747 is a Setscrew, manufactured by Goodrich Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-478-2747?

NSN 5305-00-478-2747 has 1 manufacturer part number on file: 2578834-001A (Goodrich Corporation).

What are the specifications of 2578834-001A?

Key specifications for 2578834-001A: Point Diameter: 0.240 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN; Head Height: 0.170 INCHES NOMINAL IN; Fastener Length: 0.350 INCHES NOMINAL IN; Thread Length: 0.180 INCHES MAXIMUM0.180 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-478-2747 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com