The Screw,close Tolerance, cataloged under National Stock Number 5305-00-465-5491, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-465-5491 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 2.593 INCHES MINIMUM AND 2.640 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TY 1,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.333 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN |
| Hardness Rating | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | SPS-M-107,STANDARD PRESSED STEEL CO MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.573 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SFH26-5A36 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| SFH26-5A36 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-465-5491 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-465-5491: Fastener Length: 2.593 INCHES MINIMUM AND 2.640 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TY 1,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.333 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN; Hardness Rating: 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.